Table of Contents
Advertisement
RJ-45 Console Port
The serial console port allows connecting an SD-WAN Gateway to a serial terminal or a laptop for
direct local management. This port is a RJ-45 female connector with pin-outs described in
Connect it directly to a terminal or terminal server using an Ethernet cable.
Figure 9 Serial Console Port Pin-Out
The communication settings for the Console port are shown in the following table:
Table 10 Console Terminal Settings
Baud Rate
9600
The CONSOLE port is compatible only with RS-232 devices. Non-RS-232 devices, such as APs, are not supported.
Do not connect the Console port to an Ethernet switch or a PoE power source. This may damage the Gateway.
USB Port
The EdgeConnect 10106 SD-WAN Gateway is equipped with a USB 3.0 interface. A USB storage device
can be used to save and upload configurations to the Gateway.
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
Signal Name
RJ-45 Female
Pin-Out
BI_DA+
1
BI_DA-
2
BI_DB+
3
BI_DC+
4
BI_DC-
5
BI_DB-
6
BI_DD+
7
BI_DD-
8
Data Bits
Parity
8
None
| Installation Guide
Function
Bi-directional pair +A
Bi-directional pair -A
Bi-directional pair +B
Bi-directional pair +C
Bi-directional pair -C
Bi-directional pair -B
Bi-directional pair +D
Bi-directional pair -D
Stop Bits
Flow Control
1
None
Figure
9.
Gateway Components |
11
Advertisement
Table of Contents
