Table of Contents
Advertisement
2. Place the Power Adapter Tray over the tray holes on the Gateway.
Figure 11 Aligning the Power Tray to the Gateway
3. Secure the tray to the Gateway using the four screws for the tray and a suitable screwdriver.
Figure 12 Attaching the Power Tray to the Gateway
2
2
1
4. Attach the grounding cable to the rear panel using the grounding screw removed in step 1.
Figure 13 Attaching the Grounding Cable
54 V
3. 34 A
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
| Installation Guide
Installation |
14
Advertisement
Table of Contents
