Table of Contents
Advertisement
7. Place the mounting bracket over the mounting holes of the Gateway. See
Figure
17.
8. Secure the mounting brackets to the Gateway using the eight screws (four per bracket) and a
suitable screwdriver.
Figure 17 Attaching the Mounting Brackets
2
2
1
1
9. Attach the AC cord and the cord clip to the tray.
Figure 18 Attaching the AC cord and cord clip
1
2
5
3
4
6
Figure 19 AC Power Cord is Attached
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
| Installation Guide
Installation |
16
Advertisement
Table of Contents
