Removing A System Fan Cable - IBM 9006-22P Servicing
Hide thumbs
Also See for 9006-22P:
- Installing and configuring (148 pages) ,
- Problem analysis, system parts, and locations (134 pages) ,
- Manual (36 pages)
Table of Contents
Advertisement
Figure 32. Replacing the fan
3. Install the processor air baffle.
Insert the edge of the air baffle into the fan support. Then, carefully press the air baffle down into
place.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 5104-22C, 9006-22C, or 9006-22P
system for operation after you remove and replace internal parts" on page 118.
Removing a system fan cable from the 9006-22P
To remove the fan cables in the system, complete the steps in this procedure.
Before you begin
(L008)
CAUTION: Hazardous moving parts nearby. (L008)
Power off the system and place it in the service position. For instructions, see "Preparing the 5104-22C,
9006-22C, or 9006-22P system to remove and replace internal parts" on page 115.
Removing and replacing parts in the 9006-22P 37
Advertisement
Table of Contents
