Table of Contents
Advertisement
SECTION II. GETTING READY TO SEW
Connecting Machine
to
Power Supply
@
Power
supply plug
@
Power
switch
@ outtet
@ Machine socket
@ Machine
plug
@ t-isht
nutn
Before connecting
the power cord, make sure the voltage
and frequency shown
on
the machine conform to your
electrical
power.
1. Turn off the power switch @.
2.
lnsert
the machine ptug@ into the machine socket @.
3.
lnsert
the power supply
plug
O
into the outlet
@
'
4.
Turn
the power switch @to turn on the power
and
sewing
light@.
Before UsingYour Sewing Machine
Before using your sewing machine for the first
time, place
a
waste
fabric under the presser foot and run the machine
with thread for
a
few
minutes.
Wipe away any oil which may
appear.
For
Your Safety
.
While in operation, always keep your eyes on the sewing
area.
Do
not
touch
any moving parts such as the thread
take-up lever, handwheel or needle.
"
Always
turn
off
the power switch and unplug from the
power supply:
-
When leaving the machine unattended.
-
When attaching
or removing any parts.
-
When cleaning
the machine.
*
Do not place anything on the foot control,
when
not
sewing.
Polarized plug
This
appliance has a polarized plug (one blade wider than
the
other).
To
reduce
the risk of electric shock, this plug
is
intended to
fit
in
a polarized outlet only one way.
lf
the plug
does
not
fit
in
the outlet, reverse
the plug. lf
it
still does not
fit, contact
a
qualified electrician
to installthe proper outlet.
Do not modify
the
Plug
in
anY
waY.
Foot
Controller Model YC-482J-EC or TJC-150 is used with
Sewing Machine Model 385.16782.
Gontrolling Sewing
SPeed
Sewing speed
is
varied
by
the foot control'
The harder you press on the foot control, the faster the
machine
runs.
Advertisement
Table of Contents
