Cc-Link Diagnostics Using Gx Developer - Mitsubishi Electric MELSEC QS Series User Manual

9
TROUBLESHOOTING

9.4 CC-Link Diagnostics Using GX Developer

Check the status of each module after connecting all the modules with CC-Link dedicated
cables, and verify that data link can be performed normally.
(1) Host monitoring
Follow the procedure below to monitor various states including the data link status of
the safety master station (the station to which GX Developer is connected).
(a) Operating procedure
(b) Monitoring items
[Diagnostics] [CC-Link / CC-Link/LT Diagnostics]
1) Select "CC-Link Safety" for "Module Setting".
2) Specify the target module for Host monitoring with "Module No." or "I/O
Address".
3) Click the
Start Monitoring
1) Host station
Displays the station type of the station being monitored (Safety master
station).
2) Data link status
Displays the data link status of the host.
3) Action status
Displays the operating status of the host.
4) Switching status
Displays that the data link is controlled by the safety master station.
5) Using Line
Displays the line in use.
6) Line status
Displays the line status.
7) Line type
Displays the line type.
9.4 CC-Link Diagnostics Using GX Developer
button.
9
9
- 21