Applicable System; Applicable Modules And Number Of Mountable Modules - Mitsubishi Electric MELSEC QS Series User Manual

2
SYSTEM CONFIGURATION

2.2 Applicable System

This section explains applicable PLC CPU models and the number of mountable modules.

2.2.1 Applicable modules and number of mountable modules

(1) Applicable modules and number of mountable modules
(2) Applicable base unit
(3) Applicable software package
(4) Usable slave stations
2
- 2 2.2 Applicable System
2.2.1 Applicable modules and number of mountable modules
The CPU module for which the QS0J61BT12 can be mounted and its mountable
number are listed in the table below.
Applicable module
Safety CPU
QS001CPU
module
The QS0J61BT12 can be mounted in any I/O slot of a safety main base unit.
Product name
Safety main base unit
The software package available for the QS0J61BT12 is listed below:
Product name
GX Developer
* 1 Product in version 8.40S or later is required.
Slave station types supported by the QS0J61BT12 are listed below.
Remote station type
Safety Remote I/O station
Remote I/O station
Remote device station
Intelligent device station
Standard
Local station
Standby master station
Number of mountable
modules
Up to 2
Model name
QS034B
Model name
Required MELSEC PLC programming
SWnD5C-GPPW *1
software.
"n" in the model name is 8 or greater.
Ver.1-compatible
Ver.1-compatible
Ver.2-compatible
Ver.1-compatible
Ver.2-compatible
Ver.1-compatible
Ver.2-compatible
Ver.1-compatible
Ver.2-compatible
Remark
Remarks
Remarks
:Connectable
:Not connectable