Dmx Linking - SHOWTEC 34014 User Manual

ACT Fresnel 50 RGBAL incl. barndoor
Fig. 16

DMX Linking

To connect multiple devices on one DMX data link, follow the steps below:
Connect the DMX OUT connector on the lighting controller to the DMX IN connector on the first
device with a 3-pin DMX cable.
Connect the DMX OUT connector on the first device to the DMX IN connector on the second device
with a 3-pin DMX cable.
Repeat step 2 to connect all devices in a daisy-chain as shown in Fig. 17.
Connect a DMX terminator (120 Ω resistor) to the DMX OUT connector of the last device on the data
link.
Fig. 17
Product code: 34014
18