Electrical Work; Monitoring Devices; Installing/Dismantling; During Operation - Wilo Control EC-Booster Installation And Operating Instructions Manual

en
2.3

Electrical work

2.4

Monitoring devices

2.5

Installing/dismantling

2.6

During operation

2.7

Maintenance tasks

6
• Operation/control: Operating personnel, instructed in the func-
tioning of the complete system
• Electrical work must be carried out by a qualified electrician.
• Before commencing work, disconnect the product from the
mains and safeguard it from being switched on again.
• Observe applicable local regulations when connecting to the
mains power supply.
• Adhere to the requirements of the local energy supply com-
pany.
• Earth the product.
• Observe technical information.
• Replace a defective connection cable immediately.
Circuit breakers/Fuses
The size and switching characteristics of the circuit breakers/
fuses must conform to the rated current of the connected con-
sumer. Observe local regulations.
• Locally applicable laws and regulations on work safety and ac-
cident prevention must be complied with.
• Disconnect the product from the mains and secure it against
being switched on again.
• Suitable fixation material must be used for the existing bearing
surface.
• The product is not watertight. Select an appropriate installation
site!
• Do not deform the housing during installation. Seals could leak
and affect the stated IP protection class.
• The product may not be installed in potentially explosive areas.
• The product is not watertight. Comply with protection class
IP54.
• Ambient temperature: 0 ... 40 °C.
• Maximum humidity: 90 %, non-condensing.
• Do not open the switchgear.
• The user must notify the person in charge of every fault or ir-
regularity immediately.
• In case of damage to the product or connection cable, switch
off the product immediately.
• Do not use any aggressive cleaners or scouring agents or fluids.
• The product is not watertight. Do not submerse the product in
fluids.
• Only carry out maintenance tasks mentioned in these installa-
tion and operating instructions.
Installation and operating instructions • Wilo-Control EC/ECe-Booster • Ed.02/2023-08