Advertisement
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
POWER
— pe
Pantie
CONTROL
IN
HETER
Panasorts
AmE
CME,
tit
RML riy
MAKA salle LEL]
MWEN wa
D e y t, A
Te Com
we rh aa
1. Power Switch (POWER ON/OFF)
This switch turns on and off the power of the Remote
Control Unit(RCU).
2. Power Indicator
This switch lights red whenever the unit is operating.
3. Tally Indicator (TALLY)
When this unit is used in conjunction with a Special
Effects Generator, this indicator will light to indicate
the selection
of this unit from a Special
Effects
Generator.
4. High Gain Selection Switch (0dB/9dB/+18dB)
This switch can function only when the AGC Selection
Switch (5) is set to OFF position.
Normally set the AGC Selection Switch of this unit to
OFF position.
Positions +9dB and +18dB increase the video output
amplitude for dark scenes and are equivalent to open-
ing the lens iris 1.5 or 3F steps, respectively.
.
9 6
ZBE? os [a
ie O
A
P EEEE
GEN-LOCR
AUX
0
tn
-2-
IDEO
3-¥1080 OUT
TALLY
ENSCH
Note : When the AGC Selection Switch to the LOW or
HIGH position, this switch does not work.
AGC Selection Switch (AGC HIGH/LOW/OFF)
When this unit is connected with WV-E550, the AGC
MAX level can be selected.
Refer to the Operating
Instructions of WV-E550
for
details.
. Color Bar/Camera Selection Switch(BAR/CAM)
In a system configuration, this switch is used for signal
selection between camera mode and color bar mode,
BAR : A color bar signal is provided from the Video
Output Connector (35) of this unit.
CAM
: The actual
camera
picture,
as picked
up
through the lens, is displayed.
Advertisement
