Major Operating Components And Their Functions - Panasonic WV-PS104C Operating Instructions Manual

MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS

POWER
ON
OFF
q Power On/Off Switch (POWER, ON/OFF)
This switch is used to turn the camera drive unit and
connected specified camera power on or off. The indi-
cator lights up when the power of the camera drive unit
is on.
w Cooling Fan Unit
This unit prevents the temperature of the camera drive
unit from rising
Caution:
Do not block the ventilation opening or slots on the
cover to prevent the temperature of the camera
drive unit from rising. The power indicator blinks to
indicate an unusual temperature rise. Do take
immediate action when the power indicator blinks.
Turn the power off and refer servicing to qualified
service personnel.
e Camera Input Connector (CAMERA IN)
This connector receives either a colour or B/W com-
posite video signal from the specified camera. It also
supplies DC power and vertical drive pulses or syn-
chronizing signals to the camera, and receives video
and audio signals from the camera.
r Video Output Connector (VIDEO OUT)
The video signal of the specified camera is provided at
this connector for input into the video monitor.
4ch 3ch
AUDIO AUDIO
CAMERA VIDEO CAMERA VIDEO CAMERA
OUT OUT
IN OUT IN OUT
2ch 1ch
AUDIO CAMERA VIDEO AUDIO
VIDEO VD/SYNC
OUT IN OUT OUT
IN OUT
t Audio Output Connector (AUDIO OUT)
The audio signal of the specified camera is provided at
this connector for input into the video monitor (used
with the WV-CF20 or WV-CP100 camera.).
y VD/SYNC Input Connector (VD/SYNC IN)
The VD (Vertical Drive) pulse or VS (Video Sync) signal
is supplied to this connector for synchronizing the sys-
tem.
u VD/SYNC Output Connector (VD/SYNC OUT)
The VD (Vertical Drive) pulse or VS (Video Sync) signal
is provided at this connector for synchronizing other
system components.
Note:
Be sure that the specified camera and camera
input (1ch) are connected correctly and firmly. The
synchronizing signal is not supplied if this connec-
tion is faulty.
-2-
104
Camera Drive Unit WV-PS C
VD/SYNC
IN OUT
(4V[p-p] 75W)
SIGNAL GND