Advertisement
49.
50.
51.
52.
Note: While the black balance adjustment is being
automatically performed the picture will flash in
the viewfinder and on the monitor screen. This
flashing indicates that the adjustment is currently
being performed and will cease once the adjust-
ment is completed.
Auto Warning Indicator (AUTO)
This indicator blinks while the white balance or black
balance is being automatically set. It goes out once
the white and black balances have been correctly set.
This indicator lights when the white or black balance is
set improperly.
In this case, carry out the automatic
setting procedure for white and/or black balance
White/Black Balance Selection Switch (MANU /A/B)
This switch is used to select the white balance and
black balance modes as follows:
MANU: The white balance and black balance can be
adjusted
by
using
the
Red
and
Blue
Gain
Controls
(51) and
the Red
and
Blue Pedestal
Level Controls (52).
:
A: The White Balance
can be set automatically by
pressing the Auto White/Auto Black Set Switch
itch (48) upwards. The setting is stored in memory
A.
B: Similar-to A, but the setting is stored in memory B.
Two white balance setting, one each for different light-
ing conditions such as indoor and outdoor, may be
stored in the two memories, A and B.
Red and Blue Gain Controls (R GAIN/B GAIN)
These controls are used to manually adjust the white
balance.
These
controls
only
work
when
the
White/Black
Balance
Selection
Switch
(50) is set to the MANU
position.
Turn the controls clockwise to increase the red and
blue signal levels, and counterclockwise to decrease
these levels,
Note:
As these controls employ Digital Processing,
the Red and Blue signal levels will be changed in
discrete steps.
Red and Blue Pedestal Level Controls (PED, R/B)
The black balance can be set manually by these con-
trols when the White/Black Balance Selection Switch
(50) is set to the MANU position. Turn. these controls
clockwise to increase the red and blue pedestal lev-
els, and counterclockwise to decrease the levels.
Note: As these controls employ the Digital Process-
ing, these
levels will be changed
in discrete
steps.
-8-
53.
54.
55.
56.
57.
58.
Total Pedestal Level Control (T.PED)
This control can adjust the pedestal level of the video
signal
{luminance)
for
matching
the
black
level
between two or more cameras in a system. Turn this
control clockwise to increase the pedestal level, and
counterclockwise to decrease the level.
Note: As this control employs the Digita! Processing,
this level rmay be changed in the step.
Scene Selection Switch (SCENE FILE)
This switch is used to select the most suitable camera
conditions, depending on scene conditions, to obtain
the best picture possible.
Refer to the Operating Instructions of WV-F700 or WV-
F500 series for details.
Electronic Shutter Speed Selection Switch
(OFF/100/250/500/1000/2000)
This switch is operative only when a camera featuring
the electronic shutter function is connected with this
unit.
When fast-moving objects are shot at the slow shutter
speeds typically found in conventional cameras they
will appear blurred. With the electronic shutter func-
tion, from which the following speeds can be selected:
1/100, 1/250, 1/500. 1/1000 or 1/2000 of a second,. blur-
free recording of high-speed action, such as car rac-
ing, golf swings, gymnastics, birds in flight is possible.
The selection of shutter speed is made by pressing
this switch.
OFF: Set this switch to this position when recording
normally with standard shutter speeds.
1/100, 1/250, 1/500, 1/1000, 1/2000: Choose the suit-
able shutter speed from these.
'Lens Iris Selection Switch (IRIS, MANU/AUTO)
This switch is used to set the lens iris of the auto iris
servo control zoom lens as follows.
Auto: The iris level of the lens is controlled automati-
cally.
Note: Be sure to set the Iris Control Selection Switch
on the zoom lens to the AUTO position.
MANU: The iris level of ihe lens is controlled to the
desired level by using the Lens Iris Control (57)
Lens Iris Control (IRIS LEVEL, CLOSE/OPEN)
The iris level of the zoom lens can be manually con-
trolled by turning this control
when
the Lens
fris
Selection Switch (56) is set to the MAN position
Down Switch (DOWN)
This switch is used to decrease the set value of the
item pointed out by the cursor.
Advertisement
