Panasonic WV-RC550 Operating Instructions Manual page 3

PREFACE
The WV-RC550 Remote Control Unit is used to remotely
control the WV-E550, WV-F500 or WV-F700 series.
Features and functions include white balance setting, iris
control, R/B gain control total pedestal control, color
bar/camera selection switch, horizontal and subcarrier
phase adjustment for gen-lock.
FEATURES
© Tailly/Intercom, AUX Input, and Gen-lock mpa are pro-
vided for system operation.
e With the 26-pin studio cable, (WA-CA26U15, WA-
CA26U30 or WV-CA26U 100), the WV-E550 color cam-
era and RCU may be connected with a maximum dis-
tance of 1000ft (300m).
+ When connecting the F500 camera and WV-VF65B 5"
EVF with the RCU, the maximum studio cable length is
330ft (100m).
e¢ 15-pin D-sub connector is provided for pan/tilt Opera:
tion.
e For color camera WV-F500 or WV-F700 series opera-
tions, a front panel overlay accessory is provided.
te
PRECAUTIONS
Do not attempt to disassemble the unit. There are no |
user-serviceable paris inside. Do refer any servicing
to-qualified service personnel.
Do not abuse the unit. Avoid striking, shaking etc.
Do not use strong or abrasive detergents when clean-
ing the unit. Do use dry cloth to clean the unit when
dirty. In case the dirt is hard to remove, use mild
detergent and wipe gently.
Do not expose the unit to rain or moisture. Do take
immediate action if ever the unit does become wet.
Turn power off and refer servicing to qualified service
personnel. Moisture can damage the unit and also
create the danger of electric shock.
Use the unit under the conditions where temperature
is within 14°F - 113° F(-10° C - +45° C) and humidity
is less than 90%.