Panasonic WV-RC550 Operating Instructions Manual page 7

31.
32.
33.
Camera Connector (CAMERA)
This connector is connected with the VTR/RCU
Connector of camera by using the Conversion Cable
(WV-CA26T20 with joint connector) and 26-pin studio
cable.
Control Connector (CONTROL IN)
This connector is connected with the control connec-
tor of the pan/tilt unit or lens control by using the 15-
pin multi cable.
O
DEFROSTER
+5V
+V (+7.5V)
-V (+2.5V)
Oo
®
T
ORL
O
@ ®
'on:
@ ©
O
eration —
UP
Note : The impedance for the control voltage circuit
should be 2 kohms or less.
Gen-lock Connectors
(GEN-LOCK IN/OUT/AUTO,75 /HI-Z)
These connectors receive the gen-lock signal(black
burst or composite) from the Special Effects Generator
for system reference.
When connecting two coaxial cables with BNC con-
nectors io these connectors, the high impedance
video loop is automatically selected. At all other times,
these connectors are automatically terminated with 75
ohms.
34.
35.
36.
37.
38.
TALLY
Note : When not looping the gen-lock signal, be sure
to conneci the coaxial cable to the GEN-LOCK IN
Connector. Otherwise, these connectors can not
be automatically terminated.
Auxiliary Input Connectors
(AUX IN-AUTO/75 Hi-Z OUT)
These connectors receive the lineview signal from a
Special Effects Generator. Two connectors are provid-
ed for bridging or looping application.
When connecting a single coaxial cable with BNC
connector to this connector, ihese connectors can not
be automatically terminated with 75 ohms.
Note : When not looping Aux, signal, be sure to con-
neci the coaxial cable to AUX IN Connector.
Otherwise, these connectors are automatically
terminated with 75 ohms.
Video Output Connectors (VIDEO 1, VIDEO 2)
These connectors supply a composite video signal to
a Special Effects Generator, a Video Monitor or a VTR.
S-video Output Connector (S-VIDEO OUT)
This connector outputs the Y/C signal! when the
Camera Output Signal Selector is set to Y/C position.
Audio Output Jack (AUDIO OUT)
For the WV-F500 or WV-F700 series Color Camera
operation.
Tally and Intercom Input Connector
(TALLY & INTERCOM)
This connector is connected with the Tally/Incom con-
nector of a Special Effects Generator.
TALK
6H) @
(2) O
INTERCOM
RECEIVE