Parts And Their Functions; Front Panel 1 - Panasonic AK-MSU1000G Operating Instructions Manual

Parts and their functions

Front panel 1

1 2
1 [PANEL ACTIVE] button
2 [ALL] button
3 [CLOSE] button
4 [BAR] button
5 [TEST] button
6 [AUTO WHITE] button
7 [AUTO BLACK] button
8 [AUTO SET UP] button
9 [REF RECALL] button
10 [CAM POWER] button/indicator Use this button to control camera power remotely. However, it will not function unless the CCU
11 [VF POWER] button/indicator
3 4 5 6 7
Use this button to lock (disable) the panel operation.
Lock range
Use this button to enable the following button functions to control the cameras assigned to
the camera selection buttons.
Affected area
Use this button to forcibly set the iris to CLOSE (closed).
Use this button to output the CCU color bar signal from the camera video output on the CCU
rear panel.
Use this button to switch to the TEST signal when the video signal is a camera signal or a
color bar signal.
Use this button to perform auto white balance adjustment.
Use this button to perform auto black balance adjustment.
Use this button to start auto setup.
Use this button to recall the reference setting information (reference file) for the camera.
and the camera are turned on.
Use this button to control the viewfinder power remotely.
8 9 10 11
- 23 -
Parts and their functions