Advertisement
PACK MOUNTING
When this unit is to be mounted on a EIA 19-inch rack, use Rack mount angles (provided) and four screws (M4 x 10) (provided)
1. Turn off the Power ON/OFF Switch of the unit.
2. Remove four screws fixing the rubber legs and remove the four rubber legs from the bottom of the unit.
Remove rubber legs.
3. Attach the Rack mount angles on both sides and fix them by using four screws provided with the rack mount angle.
Rack Mount Angle Fixing
Qo —._
screws (provided)
Qə —._
~-
ag
Rack Mount Angle Fixing
~~"
Gay
screws (provided)
4. Install this unit on the EIA 19-inch rack by using four screws (Locally procured).
Fix four screws (not provided).
Cautions :
+ Do not use this unit on the place affected by the vibration.
+ When the Fan is used to keep the temperature in the rack within 50°C, it should be put apart from the monitor.
-J1-
Advertisement
