Panasonic WV-PS11B Operating Instructions Manual
Camera drive unit
Hide thumbs
Also See for WV-PS11B:
- Operating instructions manual (12 pages) ,
- Operating instructions manual (12 pages)
Related Manuals for Panasonic WV-PS11B
Summary of Contents for Panasonic WV-PS11B
- Page 1 Camera Drive Unit WV-PS11B Before attempting to connect or operate this product, please read these instructions completely.
- Page 2 (servicing) Model No. WV-PS11B instructions in the literature accompa- nying the appliance. Serial No. SA 1966 WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR...
-
Page 3: Table Of Contents
CONTENTS PREFACE ..................................2 FEATURES ..................................2 PRECAUTIONS ................................3 MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS ..................4 CONNECTIONS ................................5 SPECIFICATIONS ................................9... -
Page 4: Preface
PREFACE FEATURES The Panasonic Camera Drive Unit WV-PS11B is spe- • Stable DC power is supplied to the specified cam- cially designed to drive specified cameras such as WV- era by a regulator in the camera drive unit. BP70 or WV-CP100. -
Page 5: Precautions
PRECAUTIONS • Do not drop any metallic parts through slots. • Do not block the ventilation opening or slots on the This action could damage the appliance perma- cover to prevent the appliance temperature from nently. Turn the power off immediately and refer rising. -
Page 6: Major Operating Components And Their Functions
MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS POWER CAMERA VIDEO AUDIO VD/SYNC VD/SYNC SIGNAL CAUTION USE WITH SPECIFIED EQUIPMENT SEE ITS MANUAL BEFORE CONECTING. q Power On/Off Switch (POWER, ON/OFF) r Audio Output Connector (AUDIO OUT) This switch is used to turn the camera drive unit The audio signal of the specified camera is provid- and connected specified camera power on or off. -
Page 7: Connections
• Connect only a specified camera, WV-BP70, WV-CF20 or WV-CP100. If another camera is connected, the cam- era drive unit will not operate due to activation of the protection circuit. <Single Camera> Camera Drive Unit WV-PS11B Monitor CAMERA IN CAMERA... - Page 8 <Multi Camera System with External SYNC Operation> Monitor Camera Drive Unit WV-PS11B CAMERA IN CAMERA VIDEO AUDIO VD/SYNC VD/SYNC SIGNAL VIDEO OUT Camera VD/SYNC Monitor CAMERA IN CAMERA VIDEO AUDIO VD/SYNC VD/SYNC Camera Drive Unit WV-PS11B SIGNAL VIDEO OUT Camera...
- Page 9 1. Connect the coaxial cable between the camera Note: and CAMERA IN connector of the camera drive If the length of the coaxial cable between the unit. The approximate maximum cable length is as camera drive unit and the video monitor follows: exceeds the distance shown in the above table, a cable loss compensator should be...
- Page 10 • Composite Sync: 4 V[p-p] /75 Ω Relation between VD/SYNC IN and VD/SYNC The signal from the VD/SYNC OUT connector differs according to the connected camera and the signal sup- plied to the VD/SYNC IN connector of this unit. The signal supplied from VD/SYNC OUT is as follows: •...
-
Page 11: Specifications
SPECIFICATIONS Power Source: 120 V AC 60 Hz Power Consumption: Approx. 16 W 1.0 V[p-p] / 75 Ω, BNC Connector Camera Input: 1.0 V[p-p] / 75 Ω, BNC Connector Video Output: –10 dB / 600 Ω unbalanced, RCA pin jack Audio Output: Camera Power Supply: Regulated current multiplex method (310 mA) - Page 12 Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America IMAGING SYSTEMS DIVISION Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: 43 Hartz Way, Secaucus, NJ 07094 (201) 348-7303 Southeast: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30174 (770) 338-6835...