Table of Contents
Advertisement
pickering
pickering
SECTION 8 - MAINTENANCE INFORMATION
SECTION 7 - MAINTENANCE INFORMATION
Refer to the Warnings and Cautions at the front of this manual
PERIODIC MAINTENANCE
This product does not require any periodic maintenance.
GENERAL CLEANING
• Isolate the electrical power from the chassis and ensure that no user I/O signals are being applied.
• Wipe the product & chassis surfaces with a clean dry anti-static cloth only.
SOFTWARE UPDATE
No software updates are required for LXI products in normal operation. For the latest version of the driver
please refer to our web site
latest version of the driver software for the various programming environments encountered.
SWITCHING SYSTEM TEST TOOLS
USING BIRST ™ (BUILT-IN RELAY SELF TEST)
The Pickering Interfaces BIRST (Built-In Relay Self Test) Tool provides a simple means of testing selected Pickering
Interfaces switching products, including this model. The tool can be used to find relay faults or to provide confirmation that a
product is operating correctly, either as part of the regular system calibration or because a system fault is suspected and the
switch system needs to be eliminated from the fault finding procedure.
BIRST SOFTWARE
The application program for BIRST is supplied with the support disc included when the product is shipped. Alternatively the
program can be downloaded from Pickering Interfaces web site:
Warning: The BIRST facility requires that the UUT is disconnected from the products front panel connector(s).
Failure to disconnect could result in either misleading results or damage to the BIRST hardware within the product.
Please refer to the documentation accompanying the application for detailed usage / operation details.
For further general information on BIRST click here.
USING
eBIRST
We recommend the use of
location of any faulty relay. For more information on
RELAY LOOK-UP TABLES
The following pages provide a cross reference between the signal paths of the product and the physical relays
on the PCB. The tables can be used in the fault finding process and should be used in conjunction with the
corresponding PCB layout diagrams to identify the position of faulty relays. Users of
test tools do not need to use this information to locate faulty relays.
pickeringtest.com
eBIRST
to provide a check of the correct operation of relays and to identify the
LXI HIGH DENSITY EMR MATRIX 60-550/551
LXI MODULAR HIGH VOLTAGE MATRIX 65-218
SECTION 7 - MAINTENANCE INFORMATION
SECTION 8 - MAINTENANCE INFORMATION
where links to our Software Download page will provide the
www.pickeringtest.info/downloads/BIRST/
eBIRST
click here.
!
eBIRST
switching system
Page 8.1
Page 7.1
Advertisement
Table of Contents
