Subscribe to Our Youtube Channel
Related Manuals for Pickering 50-510
Summary of Contents for Pickering 50-510
- Page 1 50-510/511/512/513 User Manual PCI High Density Matrix Card pickeringtest.com Issue 5.5 January 2022...
- Page 2 Pickering Interfaces. Technical details contained within this publication are subject to change without notice. ISO 9001 Reg No. FM38792 PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 REED RELAY MODULE 40-110/115/120/125 Page (II) Page (II)
- Page 3 Pickering Interfaces strives to fulfil all relevant environmental laws and regulations and reduce wastes and releases to the environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.
-
Page 4: Product Safety
STATIC SENSITIVE To indicate that static sensitive devices are present and handling precautions should be followed. REED RELAY MODULE 40-110/115/120/125 PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page (IV) Page (IV) -
Page 5: Table Of Contents
Section 5 Connector Information ..............5.1 Section 6 Trouble Shooting .................6.1 Section 7 Maintenance Information ............7.1 Switching System Test Tools ..........7.1 Relay Look-up Tables ............7.1 Component Layout ..............7.6 PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page (V) - Page 6 THIS PAGE INTENTIONALLY BLANK PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page (VI)
-
Page 7: Warnings And Cautions
Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale. This card must not be used for the switching of Mains Circuits. For the switching of voltages up to the card’s full specification, Secondary Circuit power supplies and the Device Under Test must be... - Page 8 • For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on the front of the unit. PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page (VIII) PCI REED RELAY CARD 50-110 / 115 / 120 / 125...
-
Page 9: Technical Specification
1-Pole screened. Y101 Y102 Y103 Y104 50-510 22x4 Matrix Y201 Y202 Y203 Y204 50-511 Dual 20x4 Matrix 50-513 44x4 Matrix 50-512 22x8 2-Pole Matrix pickeringtest.com PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 1.1... - Page 10 * For full voltage rating, signal sources must be fully isolated from mains supply and safety earth. Power Requirements +3.3 V +5 V +12 V -12 V Min: 0.8 W Typical: 1.4 W Max: pickeringtest.com PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 1.2...
- Page 11 90-016D 96-pin micro-D Connector Accessories data sheet where a complete list and documentation can be found for accessories, or refer to the Connection Solutions catalog. pickeringtest.com PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 1.3...
- Page 12 To learn more, please go to: pickeringrelay.com Programming Pickering provide kernel, IVI and VISA (NI & Keysight) drivers which are compatible with all Microsoft supported versions of Windows and popular older versions. For a list of all supporting operating systems, please see: pickeringtest.com/os The VISA driver is also compatible with Real-Time Operating Systems such as LabVIEW RT.
- Page 13 Three Year Warranty & Guaranteed Long-Term Support All standard products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of three years from the date of delivery to the original purchaser. Extended warranty and service agreements are available for all our modules and systems with various levels to suit your requirements.
- Page 14 SECTION 1 - TECHNICAL SPECIFICATION pickering THIS PAGE INTENTIONALLY BLANK PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 1.6...
-
Page 15: Functional Description
U8 TO U29 EDGE CONNECTOR PCI BRIDGE CONTROL LOGIC MODULE CONFIGURATION U3 TO U7 PCI BRIDGE CONFIGURATION Figure 2.1 - Matrix Module (50-510/511/512/513): Functional Block Diagram PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 2.1... -
Page 16: Expanding The Matrix
Y2/10 Y3/11 Y4/12 Y5/13 Y6/14 Y7/15 Y8/16 50-512 MATRIX #2 Figure 2.3 - Linking Two 50-512 Cards Using 50-976-050 Ribbon Cable to Create a 22x16 Matrix PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 2.2... - Page 17 Y BUSES CONNECTED USING RIBBON CABLE LINKING J2 CONNECTORS 50-513 MATRIX #2 Figure 2.6 - Linking Two 50-513 Cards Using 50-976-020 Ribbon Cable to Create an 88x4 Matrix PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 2.3...
- Page 18 SECTION 2 - TECHNICAL DESCRIPTION pickering THIS PAGE INTENTIONALLY BLANK PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 2.4...
-
Page 19: Installation
Modular products require installation in a suitable chassis. The card is designed for indoor use only. PREOPERATION CHECKS (UNPACKING) 1. Check the card for transport damage and report any damage immediately to Pickering Interfaces. Do not attempt to install the product if any damage is evident. -
Page 20: Hardware Installation
8. Power-up the host system. SOFTWARE INSTALLATION First install the appropriate Pickering PCI switch card drivers by running the installer program Setup.exe (provided in a compressed zip file), either from the CD-ROM supplied, or by downloading the latest version from our website pickeringtest.com... -
Page 21: Testing Operation
Figure 3.2 - General Soft Front Panel Icon A selector panel will appear, listing all installed Pickering PCI, PXI or LXI switch cards and resistor cards. Click on the card you wish to control, and a graphical control panel is presented allowing operation of the card. - Page 22 SECTION 3 - INSTALLATION pickering THIS PAGE INTENTIONALLY BLANK PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 3.4...
-
Page 23: Programming Guide
SECTION 4 - PROGRAMMING GUIDE PROGRAMMING OPTIONS FOR PICKERING INTERFACES PCI CARDS For information on the installation and use of drivers and the programming of Pickering’s products in various software environments, please refer to the Software User Manual. This is available as a download from: https://www.pickeringtest.com/support/software-drivers-and-downloads... -
Page 24: Module Architecture
MODULE ARCHITECTURE 50-510/511/512/513 The 50-510 Series Modules utilise up to 176 SPST or DPST relays depending on the option. In the default state the relays are open circuit. Energising a particular relay creates a signal path between the ‘C’ and ‘A’ terminals. Some of the relay module’s switching architectures are detailed in the diagrams below, others are similar:... - Page 25 SECTION 4 - PROGRAMMING GUIDE pickering Table 4.2 - Dual 20x4 Matrix 50-511: Sub-Units Matrix 2 Matrix 1 Dual 20x4 Matrix (50-511) Posn Posn Posn Posn PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 4.3...
- Page 26 SECTION 4 - PROGRAMMING GUIDE pickering Table 4.3 - Single 22x8 Matrix 50-512: Sub-Units Single 22x8 Matrix (50-512) Posn Posn Posn Posn PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 4.4...
- Page 27 SECTION 4 - PROGRAMMING GUIDE pickering Table 4.4 - Single 44x4 Matrix 50-513: Relays Single 44x4 Matrix (50-513) Posn Posn Posn Posn PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 4.5...
-
Page 28: Programming The Module
SECTION 4 - PROGRAMMING GUIDE pickering PROGRAMMING THE MODULE Here are some simple examples of using the drivers with the 50-510-021 module (22x4 Single Pole Matrix). Other modules in the range operate in a similar way. Using PILPXI To operate a relay the user could use the simple OpCrosspoint, OpBit or the WriteSub commands OpCrosspoint DWORD sub_unit = 1;... - Page 29 Figure 5.1 - Matrix Module (50-510): Pinout - 96-pin micro-D Connector Viewed From Front of Card NOTE: Internal PCB shield plane is connected to outer shell. PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 5.1...
- Page 30 50-511-021-S Figure 5.2 - Matrix Module (50-511): Pinout - 96-pin micro-D Connector Viewed From Front of Card NOTE: Internal PCB shield plane is connected outer shell. PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 5.2...
- Page 31 Figure 5.3 - Matrix Module (50-512): Pinout - 96-pin micro-D Connector Viewed From Front of Card NOTE: Internal PCB shield plane is connected to outer shell. PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 5.3...
- Page 32 Figure 5.4 - Matrix Module (50-513): Pinout - 96-pin micro-D Connector Viewed From Front of Card NOTE: Internal PCB shield plane is connected to outer shell. PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 5.4...
-
Page 33: Trouble Shooting
PCI configuration, highlighting any potential configuration problems. Specific details of all installed Pickering switch cards are included. All the installed Pickering switch cards should be listed in the “Pilpxi information” section - if one or more cards is missing it may be possible to determine the reason by referring to the PCI configuration dump contained in the report, but interpretation of this information is far from straightforward, and the best course is to contact Pickering support: support@pickeringtest.com, if possible... - Page 34 SECTION 6 - TROUBLE SHOOTING pickering THIS PAGE INTENTIONALLY BLANK PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 6.2...
-
Page 35: Maintenance Information
PCB layout diagrams to identify the position of faulty relays. Users of eBIRST switching system test tools do not need to use this information to locate faulty relays. PCI REED RELAY CARD 50-110A /115A PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.1 Page 7.1... - Page 36 SECTION 7 - MAINTENANCE INFORMATION pickering Table 7.1 - Single 22x4 Matrix 50-510: Relays Single 22x4 Matrix (50-510) Crosspoint Relay Crosspoint Relay Crosspoint Relay Crosspoint Relay Position Position Position Position PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.2...
- Page 37 Table 7.2 - Dual 20x4 Matrix 50-511: Relays Matrix 2 Matrix 1 Dual 20x4 Matrix (50-511) Crosspoint Relay Crosspoint Relay Crosspoint Relay Crosspoint Relay Position Position Position Position PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.3...
- Page 38 SECTION 7 - MAINTENANCE INFORMATION pickering Table 7.3 - Single 22x8 Matrix 50-512: Relays Single 22x8 Matrix (50-512) Crosspoint Relay Crosspoint Relay Crosspoint Relay Crosspoint Relay Position Position Position Position PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.4...
- Page 39 SECTION 7 - MAINTENANCE INFORMATION pickering Table 7.4 - Single 44x4 Matrix 50-513: Relays Single 44x4 Matrix (50-513) Crosspoint Relay Crosspoint Relay Crosspoint Relay Crosspoint Relay Position Position Position Position PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.5...
- Page 40 RL84 RL40 RL173 RL129 RL85 RL41 RL174 RL130 RL86 RL42 RL175 RL131 RL87 RL43 RL176 RL132 RL88 RL44 Figure 7.1 - 22x4 Matrix 50-510: Component Layout PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.6...
- Page 41 RL40 RL173 RL129 RL85 RL41 RL174 RL130 RL86 RL42 RL175 RL131 RL87 RL43 RL176 RL132 RL88 RL44 Figure 7.2 - Dual 20x4 Matrix 50-511: Component Layout PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.7...
- Page 42 RL85 RL41 RL174 RL130 RL86 RL42 RL175 RL131 RL87 RL43 RL176 RL132 RL88 RL44 Figure 7.3 - 22x8 Matrix 50-512 and 44x4 Matrix 50-513: Component Layout PCI HIGH DENSITY MATRIX CARD 50-510 / 511 / 512 / 513 Page 7.8...
Need help?
Do you have a question about the 50-510 and is the answer not in the manual?
Questions and answers