Installation; Installing The Unit - Pickering 65-218 User Manual

pickering
pickering
Refer to the Warnings and Cautions at the front of this manual
The product is designed for indoor use only.
PREOPERATION CHECKS (UNPACKING)
1. Check the module for transport damage and report any damage immediately to Pickering Interfaces.
Do not attempt to install the product if any damage is evident.
2. Ensure that the designated area for the product is of a flat and solid construction to support its weight.

INSTALLING THE UNIT

For a full description for installing the scalable chassis and instructions for fitting and configuring the plugin modules,
please refer to the 65-200 user manual.
This can be downloaded via the web page:
https://www.pickeringtest.com/product/65-200-002-lxi-2u-modular-chassis-6-slot
HIGH VOLTAGE WARNING: When the 65-218 is connected to a test system, potentially leathal voltages may
be present on any front panel connector - un-used connectors must be covered with the caps provided.
SECTION 3 - INSTALLATION
SECTION 3 - INSTALLATION
LXI HIGH VOLTAGE 2-POLE MATRIX 60-310
LXI MODULAR HIGH VOLTAGE MATRIX 65-218
SECTION 3 - INSTALLATION
SECTION 3 - INSTALLATION
!
kg
Page 3.1
Page 3.1