Pickering 65-218 User Manual page 14

SECTION 1 - TECHNICAL SPECIFICATION
Ordering Information
Product Order Codes
Specify which modules are required to build the matrix,
Pickering Interfaces will supply the chassis with the
modules installed if ordered at the same time. Plugin
modules can be ordered for chassis already supplied.
Chassis
2U LXI Scalable Chassis, 6-Slot
Matrix Plugin Modules
50x4, with chassis Y bus access (400 V)
50x4, without chassis Y bus access (750 V) 65-218-111
50x4, without chassis Y bus access (1 kV) 65-218-121-CC
BIRST Adapter Cable
50-pin to 9-pin cable allows full coverage
of BIRST dignostics (at least one required
for a 65-218 based system)
Product Customization
Pickering products are designed and manufactured on our
own flexible manufacturing lines, giving complete product
control and enabling simple customization to meet very
specific requirements. Customization can include:
• Alternative relay types
• Mixture of relay types
• Alternative number of relays
• Different performance specifications
All customized products are given a unique part number,
fully documented and may be ordered at any time in the
future. Please contact your local sales office to discuss.
Operating/Storage Conditions
Operating Conditions
Operating Temperature:
Humidity:
Altitude:
Storage and Transport Conditions
Storage Temperature:
Humidity:
Altitude:
The 65-218 range is part of a growing family of
Scalable Matrix systems available from Pickering
Interfaces. Illustrated is the LXI 65-219 Modular 2
Amp Matrix, available in sizes up to 60x40.
Page 1.6
65-200-002
65-218-101
64-218-BAT509
0 °C to +55 °C
Up to 90 % non-condensing
5000 m
-20 °C to +75 °C
Up to 90 % non-condensing
15000 m
LXI MODULAR HIGH VOLTAGE MATRIX 65-218
LXI Modular High Voltage Matrix, 65-218
Support Products
BIRST Adapter Cable
For the BIRST tool to achieve full relay coverage the
64-218-BAT509 adapter cable is required to allow the
isolation switches to be tested. The cable consists of
pre-wired 50-pin & 9-pin D-type sockets, and is fitted to
the front panel X and Y connectors during testing - see
manual for details.
eBIRST Switching System Test Tool
This product is supported by the eBIRST test tools which
simplify the identification of failed relays, the required
eBIRST tools are below. This product requires master
slave testing and and one set of each tool is required
together with the master slave cable 93-970-301. For
more information go to: pickeringtest.com/ebirst
Connector Test Tool
50-pin 93-005-001
9-pin 93-005-001
Mating Connectors & Cabling
For connection accessories for the 65-218 please refer to
the 90-005HVD High Voltage 50-pin D-type and
High Voltage 9-pin D-type Connector Accessories data
sheets where a complete list and documentation can be
found for accessories, or refer to the Connection Solutions
catalog.
Safety & CE Compliance
All products are fully CE compliant and meet applicable
EU directives: Low-voltage safety EN61010-1:2010,
EMC Immunity EN61326-1:2013,
Emissions EN55011:2009+A1:2010.
Available from Pickering are the 60-102B and 60-103B
7 & 18 slot LXI Modular Chassis. These are capable
of hosting any of our range of PXI switching and
programmable resistor modules under LXI contol via a
Gigabit Ethernet interface. Also available are the 60-104,
60-105 & 60-106 USB/LXI Modular Chassis with 2, 4 & 6
slots which include USB as well as Ethernet control.
pickering
Adaptor Termination
Not Required 93-005-101
93-005-238 93-003-103
90-003HVD
pickeringtest.com