Advertisement
MAIN SPECIFICATIONS :
Assembly size : W15.24 x L12 x H7.8 (m) / 50 x 40 x 25.6 (ft)
Outside width : 15.24 m / 50ft, inside width : 14.4 m / 47.4 ft, length : 12 m / 40 ft
Ridge peak height : 7.8 m / 25.6 ft
Peak clearance height : 7.2 m / 23.6 ft
It is your option to pick and callthe smaller door side as front or rear, then the wider door side will be called in an
opposite way.
PRIOR TO ASSEMBLY
Please go through the whole instruction manualcompletely. It is very important to follow your local safety
regulations and industry standards during installation. Regulations may include but are not limited t o :
Safety helmets, protective eyewear, and clothing
-
Safety harnesses for all elevatedworkers
-
Proper ladder, cage, and safetyoperation
-
Check all components and parts before installation. All parts are marked with a part
number, please refer to the parts list to ensure you have all parts.
Choose a day with low or no wind to install, it is hard to assemble with heavy wind. Do not make any alterations to
the structure. Do not hang any weight on the frame during installation, including parts. We are not responsible for
any damages or injuries caused by inappropriate installation, unauthorized modifications or extreme weather.
This building is not intended for human occupancy.
It is recommended to use heavy duty duct tapes to tape the tube connection joint spots to protect the cover from
damage and worn. It will help to extend the cover life span.
Check the parts list below to make sure all parts are received prior to assembly.
►www.tmgindustrial.com
1/40
TOLL FREE:1-877-761-2819
Advertisement
