Using The Blender Attachment; Using The Whisk Attachment - Vitek VT-8521 Manual Instruction

list given in the warranty certificate and on the website
www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit out of reach of children and people with
disabilities.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
•
Unpack the blender and remove any promo stickers and
package materials that can prevent the unit operation.
•
Check the unit for damages, do not use it in case of
damages.
•
Before switching the unit on, make sure that the mains
voltage corresponds to the voltage specified on the unit
body.
•
Wash the attachments (1, 9), the bowl (11) and the knife
(12) of the chopper, the measuring cup (7) with warm
water and a neutral detergent and dry them thoroughly
before use.
•
Wipe the motor unit (3), the chopper geared lid (10) and
the whisk attachment gear (8) with a soft slightly damp
cloth and then wipe them dry.
ATTENTION!
–
Do not immerse the motor unit (3), the chopper geared
lid (10), the whisk attachment gear (8), the power cord
and the power plug into water or any other liquids.
–
Wash only the operating part of the blender attachment
(1), clean the outer surface with a damp cloth. Never
immerse the blender attachment (1) into water or any
other liquids completely.
–
Do not put the attachments and the bowls in
a dishwashing machine.

USING THE BLENDER ATTACHMENT

Use the removable blender attachment (1) for making fruit
puree, baby food, sauces, mayonnaise, for mixing various
ingredients and making cocktails (for processing fruit and
vegetables containing enough liquid).
WARNING: Before installing the attachment (1), make
sure that the power plug is not inserted into the mains
socket.
•
Insert the detachable blender attachment (1) into the
motor unit (3), and turn it clockwise all the way, make
sure that the attachment is secured properly.
•
Insert the power plug into the mains socket.
•
Make sure that speed control knob (6) is set to «MIN».
•
Lower the blender attachment (1) into the container
with the products you want to chop/mix.
Note: You can place the products into the cup (7).
ATTENTION!
– Do not put overheated (above 60°C) food products into
the cup (7) to avoid damaging it.
– While processing products keep the unit vertically.
– To switch the unit on, press and hold down the but-
ton (5).
– You can adjust speed with speed control knob (6).
– For operation at the maximal rotation speed, press and
hold down the button (4).
Notes:
– Products should be put into the bowl before the unit is
switched on. The amount of products to be processed
should not exceed 2/3 of the capacity of the bowl in
which they are processed.
– Before starting to chop/mix, we recommend to peel
fruit, remove inedible parts, such as stones, and cut
fruit into cubes approximately 2х2 cm in size.
•
After using the unit, unplug the power cord from the
electrical outlet and detach the detachable blender
attachment (1) by turning it counterclockwise.
ATTENTION!
– The time of continuous operation of
attachment (1) should not exceed 35 seconds, take a
break for at least 2 minutes between work cycles. After
5 continuous cycles, the unit should rest for 30 minutes
to cool down the electric motor.
– Do not remove the blender attachment (1) during
operation.
– To avoid damaging the blades, do not process too hard
products such as cereals, rice, spices, coffee beans,
hard cheeses, frozen products etc.
– If the foodstuffs are hard to chop with the blender
attachment (1), add some liquid if possible.

USING THE WHISK ATTACHMENT

Use the whisk attachment (9) only for beating cream and
egg whites, making biscuit dough or for mixing ready des-
serts.
WARNING: Before installing the whisk (9) and the gear (8),
make sure that the power plug is not inserted into the
mains socket.
•
Insert the whisk attachment (9) into the whisk gear (8).
•
Insert the whisk reducer (8) into the motor unit (3)
and turn it clockwise until it locks securely into place.
Ensure the firm attachment of the reducer (8) and
whisk (9).
•
Insert the power plug into the mains socket.
•
Make sure that speed control knob (6) is set to «Min»
position.
•
Immerse the whisk (9) into the bowl with food.
Note: You can put the foodstuffs into the cup (7).
•
To switch the unit on, press and hold down the but-
ton (5).
•
You can adjust speed with speed control knob (6).
•
For operation at the maximal rotation speed, press and
hold down the button (4).
•
After using the unit, unplug the power cord from the
electrical outlet, detach the whisk reducer (8) from
the motor unit (3) by turning the reducer (8) counter-
clockwise.
•
Remove the whisk (9) from the reducer (8).
ATTENTION!
– The time of continuous operation with the whisk attach-
ment (9) should not exceed 2 minutes, take a break for
at least 2 minutes between work cycles. After 5 contin-
uous cycles, the unit should rest for 30 minutes to cool
down the electric motor.
– Do not use the whisk attachment (9) to knead tight
dough.
– Put products into the bowl before switching the unit on.
9
ENGLISH
the blender