Safety Precautions - Vitek VT-8521 Manual Instruction

ENGLISH
BLENDER SET VT-8521
The blender is included into the blender set and intended
for whisking, mixing, chopping.
DESCRIPTION
1. Detachable blender attachment
2. Attachment installation place
3. Motor unit
4. «Turbo» mode button
5. ON button
6. Speed control knob
7. Measuring cup
8. Whisk attachment gear
9. Whisk attachment
10. Chopper geared lid
11. Chopper bowl
12. Chopping knife
ATTENTION!
For additional protection it is reasonable to install a residual
current device (RCD) with nominal operation current not
exceeding 30 mA. To install an RCD contact a specialist.

SAFETY PRECAUTIONS

Before using the blender set, read this instruction care-
fully. Keep these instructions for further reference. Use
the blender set for its intended purpose only as specified
in this manual.
Mishandling of the unit can lead to its breakdown, injury to
the user, as well as cause harm to the user or damage to
his/her property.
•
Before connecting the unit to the mains, make sure that
the voltage specified on the unit corresponds to your
home mains voltage.
•
Do not use the unit outdoors.
•
Do not use the unit near hot surfaces (such as gas or
electric stove, oven).
•
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power cord and
the plug with wet hands.
•
To avoid risk of electric shock or fire, do not immerse
the unit, the power cord and the power plug into water
or any other liquids.
•
If the unit is dropped into water:
– do not touch the water;
– unplug the unit immediately, only after that you may
take the unit out of water;
– apply to an authorized service center for testing or
repairing the unit.
•
Before using the unit for the first time, thoroughly wash
all the removable attachments and containers that will
contact food.
•
Use only the attachments supplied with the unit.
•
Before using the unit, make sure that the attachments
are set and fixed properly.
•
Always disconnect the blender from the mains when
left unattended, before assembling, disassembling, or
cleaning, as well as after use.
•
It is not allowed to switch the unit on without attach-
ments and foodstuffs for processing.
•
Always unplug the blender if it is left unattended and
before assembling, disassembling or cleaning; as well
as after using.
•
Place the chopper bowl on a flat stable surface.
•
Foodstuffs should be put into the chopper bowl before
the unit is switched on.
•
Cool down hot foodstuffs before putting them into the
measuring cup or the chopper bowl.
•
Do not overfill the chopper bowl with food and watch
the level of poured liquids.
•
The unit is not intended for mixing of sticky and viscous
ingredients.
•
If rotation of the chopping knife is hindered during the
operation of the chopper, unplug the unit and carefully
remove foodstuffs that prevent blade rotation.
•
Remove products and pour out liquids from the chop-
per bowl only after the chopper knife is completely
stopped and removed.
•
The cutting edges of the chopping knife and of the
blender attachment are very sharp and dangerous.
Handle these attachments very carefully!
•
Do not touch the rotating parts of the unit. Do not let
hair or free hanging clothes get into the rotation area of
the blender attachment knife or whisk.
•
Handle sharp cutting blades with care, when emptying
the bowl and during cleaning.
•
When disconnecting the unit, do not pull on the power
cord. Grasp the plug of the power cord directly and
unplug it from the socket.
•
Do not place the chopper bowl and the measuring cup
into a microwave oven.
•
Do not put the attachments and the bowls in a dish-
washing machine.
•
For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
Attention! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
•
Never use the unit if the power cord or the power plug
is damaged, if the unit works improperly or after it was
dropped.
•
Close supervision is necessary when children or people
with disabilities are near the operating unit.
•
Do not allow children to use the blender unsupervised.
•
Do not leave children unattended to avoid them using
the unit as a toy.
•
Do not allow children to touch the body of the motor
unit, the power cord or the power plug during opera-
tion of the unit.
•
During the unit operation and breaks between opera-
tion cycles, place the unit out of reach of children.
•
The unit is not intended to be used by people with phys-
ical, sensory or mental disabilities (including children)
or by persons lacking experience or knowledge if they
are not under supervision of a person who is respon-
sible for their safety or if they are not instructed by this
person on the usage of the unit.
•
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
•
Do not attempt to repair the unit by yourself. Do not
disassemble the unit; if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center from the contact address
8