Before Using The Unit; Using The Blender Attachment - Vitek VT-3418 W Manual Instruction

VT-3418_70x130.indd 5
into water or any other liquids. If the unit is dropped
into water:
– do not touch the water;
– unplug the unit immediately, only after that you may
take the unit out of water;
– apply to an authorized service center for testing or
repairing the unit.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY

BEFORE USING THE UNIT

After unit transportation or storage under cold (winter)
conditions, it is necessary to keep it for at least two
hours at room temperature before switching on.
• Wash the attachment that will contact products with
warm water and a neutral detergent and dry them thor-
oughly before use.
• Clean the motor unit (2) with a soft, slightly damp cloth
and then wipe it dry.
Attention!
• Do not immerse the motor unit (2), power cord and
power plug into water or any other liquids.
• Do not wash the attachment in a dishwashing
machine.
Continuous operation time
• The blender allows quick and effective operation, but
continuous operation time should not exceed 1 minute
while using the blender attachment. Make at least a
10-minute break between operation cycles.

USING THE BLENDER ATTACHMENT

WARNING: Before assembling and installing attach-
ments, make sure that the power plug is not inserted
into the mains socket.
• Attach the blender attachment (1) to the motor unit (2),
and turn it counterclockwise until bumping.
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl with
products that you want to chop/mix.
ENGLISH
5
06.05.2015 16:39:00