Safety Precautions - Vitek VT-1477 Instruction Manual

Blender set
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
ENGLISH
BLENDER SET VT-1477
The blender is included into the blender set and
intended for whisking, mixing, chopping and com-
bined processing of liquid and solid products.
DESCRIPTION
1. Detachable blender attachment
2. Attachment installation place
3. Motor unit
4. «Turbo» mode button
5. ON button
6. Speed control knob
7. Hanging loop
8. Whisk attachment gear
9. Whisk attachment
10. Cup
11. Chopper bowl
12. Chopping knife
13. Chopper geared lid
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install an RCD
contact a specialist.

SAFETY PRECAUTIONS

Before using the blender set, read this instruction
carefully. Keep these instructions for further refer-
ence. Use the blender set for its intended purpose
only as specified in this manual.
Mishandling the unit may lead to its breakage and
cause harm to the user or damage to his/her prop-
erty.
Before connecting the unit to the mains, make
sure that the voltage specified on the unit corre-
sponds to your home mains voltage.
Do not use the unit outdoors.
Do not use the unit near hot surfaces (such as gas
or electric stove, oven).
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
Do not touch the motor unit body, the power cord
and the plug with wet hands.
To avoid risk of electric shock or fire, do not
immerse the unit body, the power cord and the
power plug into water or any other liquids.
If the unit is dropped into water:
– do not touch the water;
– unplug the unit immediately, only after that
you may take the unit out of water;
– apply to an authorized service center for test-
ing or repairing the unit.
Before using the unit for the first time, thoroughly
wash all the removable attachments and contain-
ers that will contact food.
Use only the attachments supplied with the unit.
Before using the unit, make sure that the attach-
ments are set and fixed properly.
It is not allowed to switch the unit on without
attachments and foodstuffs for processing.
Never leave the unit connected to the mains unat-
tended.
Disconnect the unit from power before assem-
bling/disassembling, cleaning, swapping the
attachments and after use.
Place the chopper bowl on a flat stable surface.
Foodstuffs should be put into the chopper bowl
before the unit is switched on.
Cool down hot foodstuffs before putting them into
the measuring cup or the chopper bowl.
Do not overfill the chopper bowl with food and
watch the level of poured liquids.
The unit is not intended for mixing of sticky and
viscous ingredients.
If rotation of the chopping knife is hindered dur-
ing the operation of the chopper, unplug the
unit and carefully remove foodstuffs that prevent
blade rotation.
Remove products and pour out liquids from the
chopper bowl only after the chopper knife is com-
pletely stopped and removed.
The cutting edges of the chopping knife and of
the blender attachment are very sharp and dan-
gerous. Handle these attachments very carefully!
Do not touch the rotating parts of the unit. Do not
let hair or free hanging clothes get into the rota-
tion area of the blender attachment knife or whisk.
To unplug the unit, do not pull the power cord,
instead take the power cord plug and disconnect
it from the mains.
Do not place the chopper bowl and the measuring
cup into a microwave oven.
Do not put the attachments and the bowls in a
dishwashing machine.
For children safety reasons do not leave poly-
ethylene bags used as a packaging unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
Close supervision is necessary when children
or people with disabilities are near the operat-
ing unit.
This unit is not intended for usage by children.
Do not leave children unattended to avoid them
using the unit as a toy.
Do not allow children to touch the body of the
motor unit, the power cord or the power plug dur-
ing operation of the unit.
During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
The unit is not intended to be used by people with
physical, sensory or mental disabilities (includ-
ing children) or by persons lacking experience
or knowledge if they are not under supervision
of a person who is responsible for their safety or
8

Advertisement

Table of Contents
loading

Table of Contents