Table of Contents
Advertisement
PC CONNECTION
(WINDOWS)
1.
Power-up FTC921 with DC voltage (10-90V) power supply
using power wires. LEDs should start blinking.
2.
Connect device to computer using Micro-USB cable
and install USB driver, see
(Windows)
"
1
Page 6, "How to install USB drivers"
1
"How to install USB drivers
HOW TO INSTALL USB
DRIVERS (WINDOWS)
1.
Please download COM port drivers from
2.
Extract and run TeltonikaCOMDriver.exe.
3.
Click Next in driver installation window.
4.
In the following window click Install button.
5.
Setup will continue installing the driver and eventually the
confirmation window will appear. Click Finish to complete
the setup.
wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip
1
here
.
1
Quick Manual v1.5 // FTC921
7
Advertisement
Table of Contents
