Pc Connection (Windows); How To Install Usb Drivers (Windows) - Teltonika TAT240 Quick Manual

PC CONNECTION (WINDOWS)

1. Power-up TAT240 device. LED should start blinking, see
2. Connect your device to computer using Micro-USB cable:
• You will need to install USB drivers, see
3. You are now ready to use the device on your computer.
Page 11 "LED indications"
1
Page 5, "PC Connection (Windows)"
2

HOW TO INSTALL USB DRIVERS (WINDOWS)

1. Please download COM port drivers from
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip
1
''LED indications''
''How to install USB Drivers
here .
1
.
1
(WINDOWS)"
2
Quick Manual v1.0 // TAT240 5