Advertisement
PIN
PIN NAME
NUMBER
1
VCC
(10-30)V
DC (+)
2
DIN 4 / AIN 1
3
DIN 3 / AIN 2
4
DIN 2
5
DIN 1
6
INPUT 6
7
GND (-)
8
DOUT 1
9
DOUT 2
10
1WIRE POWER +3,8 V output for 1–Wire
11
1WIRE DATA
12
INPUT 5
PC Connection (Windows)
1.
Power-up
FM3612
LED's should start blinking, see
2.
Connect device to computer using Micro-USB cable:
You will need to install USB drivers, see
3.
You are now ready to use the device on your computer.
How to install USB drivers (Windows)
1.
Please download COM port drivers from here.
2.
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect
when it is connected to the computer.
Click Next in driver installation window.
3.
4.
In the following window click Install button.
5.
Setup will continue installing the driver and eventually the confirmation window will appear.
Click Finish to complete the setup. You are now ready to use the device on your computer.
Configuration (Windows)
FM3612
At first
device will have default factory settings set. These settings should be changed
according to the user's needs. Main configuration can be performed via
Get the latest
FM3612
Configuration process begins by connect in the top left corner:
DESCRIPTION
Power supply (+10-30 V
DC).
Analog input, channel 1.
Input range: 0-30 V DC /
Digital input, channel 4.
Analog input, channel 2.
Input range: 0-30 V DC /
Digital input, channel 3.
Digital input, channel 2.
Digital input, channel 1.
TX EXT (LVCAN – TX).
Ground.
Digital output, channel 1.
Open collector output.
Max. 3,3 A DC.
Digital output, channel 2.
Open collector output.
Max. 3,3 A DC.
devices.
Data for 1–Wire devices.
RX EXT (LVCAN - RX).
with DC voltage (10 – 30 V) power supply using supplied power cable.
"LED behaviour
Configurator version from here.
description".
"How to install USB drivers
(Windows)"
FM3612
FM Configurator
software.
device
Advertisement
