Table of Contents
Advertisement
PC CONNECTION (WINDOWS)
1.
Power-up FMC150 with DC voltage (10 – 30 V) power supply using supplied power cable. LED's should start blinking, see
indications
".
1
2.
Connect device to computer using Micro-USB cable or Bluetooth
• Using Micro-USB cable
•
You will need to install USB drivers, see
• Using Bluetooth
®
•
FMC150 Bluetooth
other device > Bluetooth
password 5555, press Connect and then select Done.
3.
You are now ready to use the device on your computer.
wiki.teltonika-gps.com/view/FMC150_LED_status
1
Page 7, "How to install USB drivers"
2
HOW TO INSTALL USB DRIVERS (WINDOWS)
1.
Please download COM port drivers from
2.
Extract and run TeltonikaCOMDriver.exe.
3.
Click Next in driver installation window.
4.
In the following window click Install button.
5.
Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
teltonika-gps.com/downloads/en/FMC150/TeltonikaCOMDriver.zip
1
"How to install USB drivers (Windows)
is enabled by default. Turn on Bluetooth
®
. Choose your device named – "FMC150_last_7_imei_digits", without LE in the end. Enter default
®
here
.
1
connection:
®
"
2
connection on your PC, then select Add Bluetooth
®
"LED
®
Quick Manual v1.7 // FMC150
8
or
Advertisement
Table of Contents
