Max. 0,5 A DC. Digital output, channel 2. Open DOUT 2 collector output. Max. 0,5 A DC. 1WIRE +3,8 V output for 1–Wire POWER devices. 1WIRE Data for 1–Wire devices. DATA INPUT 5 RX EXT (LVCAN - RX). Quick Manual v1.2 // FMC234...
INPUT 6 INPUT 5 IBUTTON DIN1 1WIRE DATA DIN2-N/AIN1 1WIRE POWER DIN3/AIN2 DOUT2 DOUT3 DOUT1 FUEL GAUGE +10...30 V DC BUZZER ANALOG POWER SUPPLY LLS SENSOR DOOR SENSOR 10 - 30V DC CENTRAL LOCK STARTER Quick Manual v1.2 // FMC234...
PC CONNECTION (WINDOWS) Power-up FMC234 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications ”. Connect device to computer using Micro-USB cable or Bluetooth connection: ® • Using Micro-USB cable •...
CONFIGURATION At first FMC234 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
Page 9
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMC234 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMC234_Status_info wiki.teltonika-gps.com/view/FMC234_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC234_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC234_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC234_Status_info#Maintenance...
2003 – APN password (if there are no APN password, empty field should be left) SERVER SETTINGS: 2004 – Domain 2005 – Port 2006 – Data sending protocol (0 – TCP, 1 – UDP) Quick Manual v1.2 // FMC234...
Page 11
If device has made a stationary and record ignition is off After successful SMS configuration, FMC234 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator...
If the wire is fixed with the bolt, the loop must be connected to the end of the wire. • For better contact scrub paint from the spot where loop is going to be connected. Quick Manual v1.2 // FMC234...
LED INDICATIONS BASIC CHARACTERISTICS NAVIGATION LED INDICATIONS MODULE BEHAVIOUR MEANING FMC234- MBIB0: MeiG SLM320-E with Teltonika TM2500 Name Permanently FMC234- MCIB0: MeiG SLM320-LA GNSS signal is not received switched on with Teltonika TM2500 Blinking every LTE(CaT1)/2G(GSM/GPRS)/GNSS/ Normal mode, GNSS is working...
Page 15
Auto Geofence, Manual Geofence, Storage Trip temperature -20 °C to +85°C (without battery) GPS Sleep Online Deep Sleep Sleep modes Deep Sleep Ultra Deep Sleep Operating temperature -20 °C to +60 °C (with battery) wiki.teltonika-gps.com/view/FMC234_Features_settings 7 wiki.teltonika-gps.com/view/FMC234_Sleep_modes 8 Quick Manual v1.2 // FMC234...
Page 17
Ω Additional error on 12 Output current (Uout V, Range 1 > 3.0 V) Measurement error on Short circuit current 0.33 30 V, Range 1 (Uout = 0) Additional error on 30 V, Range 1 Quick Manual v1.2 // FMC234...
Page 18
VALUE CHARACTERISTIC DESCRIPTION MIN. TYP. MAX. UNIT NEGATIVE INPUT Input resistance 38.45 kΩ Input voltage Supply (Recommended voltage Operating Conditions) Input voltage threshold Sink current Quick Manual v1.2 // FMC234...
DO NOT touch the device before unplugging the power supply. This message contains information on how to operate FMC234 All wireless data transferring devices produce safely. By following these requirements and recommendations, interference that may affect other devices which are you will avoid dangerous situations.
® (RED). trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UAB Teltonika Telematics is The RoHS1 is a directive regulating the manufacture, under license. Other trademarks and trade names import and distribution of Electronics and Electrical are those of their respective owners.
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.2 // FMC234...