Table of Contents
Advertisement
PIN
PIN NAME
NUMBER
1
VCC
(10-30)V
DC (+)
2
DOUT 3
3
AIN 2 / DIN 3
4
DIN 2-N/AIN1
5
DIN 1
6
INPUT 6
7
GND (-)
8
DOUT 1
9
DOUT 2
10
1WIRE POWER +3,8 V output for 1–Wire
11
1WIRE DATA
12
INPUT 5
PC Connection (Windows)
1.
Power-up FMC234 with DC voltage 10-30 V power supply using supplied power cable.
LED's should start blinking, see
Connect device to computer using Micro-USB cable or Bluetooth connection:
2.
Using Micro-USB cable
You will need to install USB drivers, see
(Windows)"
Using Bluetooth
FMC234 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then
select Add Bluetooth or other device > Bluetooth. Choose your device named –
"FMC234_last_7_imei_digits", without LE in the end. Enter default password
5555, press Connect and then select Done.
3.
You are now ready to use the device on your computer.
How to install USB drivers (Windows)
Please download COM port drivers from here.
1.
2.
Extract and run TeltonikaCOMDriver.exe.
3.
Click Next in driver installation window.
In the following window click Install button.
4.
5.
Setup will continue installing the driver and eventually the confirmation window will appear.
Click Finish to complete the setup.
DESCRIPTION
Power supply (+10-30 V
DC).
Digital output, channel 3.
Open collector output.
Max. 0,5 A DC.
Analog input, channel 2.
Input range: 0-30 V DC /
Digital input, channel 3.
Digital input, channel 2,
Negative input, Analog
input, channel 1, Input
range: 0-30 V DC.
Digital input, channel 1.
TX EXT (LVCAN – TX).
Ground.
Digital output, channel 1.
Open collector output.
Max. 0,5 A DC.
Digital output, channel 2.
Open collector output.
Max. 0,5 A DC.
devices.
Data for 1–Wire devices.
RX EXT (LVCAN - RX).
"FMC234 LED
status".
"How to install USB drivers
Advertisement
Table of Contents
