NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Step 3 Remove the three bolts from each of the four corner fittings (one bolt for
connecting the corner fitting to the pallet). Then remove the outdoor unit from
the pallet, as shown in
Figure 4-39 Removing the bolts connecting the bracket angles and the pallet
----End
4.5.3 Securing an Outdoor Unit
4.5.3.1 Horizontal Installation Scenario
Context
When installing the outdoor unit, fully tighten the six stainless steel bolts for each
support leg and the two stainless steel fastening bolts that secure each support
leg to the ground.
Procedure
Step 1 Remove the four angle brackets from the side panels of the outdoor unit by
removing the two M6x16 stainless bolts from each angle bracket, as shown in
Figure
Issue 13 (2023-08-20)
Figure
NO TICE
4-40.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4-39.
4 Installation
82