Installing The Humidifier Water Inlet Pipe (Without A Humidifier Hose) - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Step 3 Connect the water inlet pipe to the engineering pipe and wrap the pipe with
thermal insulation foam.
----End
4.8.8.2 Installing the Humidifier Water Inlet Pipe (Without a Humidifier
Hose)
Procedure
Step 1 Melt the active connector with rigid pipe 1 and the elbow to form a water supply
pipe assembly, as shown by (1) and (2) in the following figure.
Step 2 Connect the water supply pipe assembly to the water inlet solenoid valve, as
shown by (3) in the following figure.
Step 3 Melt rigid pipe 2 and the water supply pipe assembly, as shown by (4) in the
following figure.
The other end is a reserved φ25 mm connector. Connect the other end to a hose
or rigid pipe based on site requirements.
Figure 4-74 Connecting a humidifier water inlet pipe
Step 4 Clean the engineering pipes before connecting the water inlet pipe to the engineer
pipe to avoid impurities entering into the humidifier.
Step 5 Connect the water inlet pipe to the engineering pipe and wrap the pipe with
thermal insulation foam.
Issue 13 (2023-08-20)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
110