NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
4.9.3 Installing Power Cables for the Indoor Unit
● Power cables can be routed from the top or bottom.
● If there is only one power supply, connect the power cable to the active power
route.
Single Power Supply
Step 1 Route the external power cable through the cabinet cable hole, and then connect
the cable to the L1, L2, L3, and N of QF1 on the indoor unit.
If there is one power supply, connect the power cable to the active power supply
QF1.
Figure 4-81 Routing power cables in the single power supply scenario
Step 2 Connect the PE cable to the ground screw, as shown in
Step 3 Secure the cables on the post of the cabinet with cable ties.
----End
Issue 13 (2023-08-20)
CA UTION
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
Figure
4-81.
116