Setting Parameters; Setting T/H Sensor Parameters - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
No.
11
12

6.5 Setting Parameters

6.5.1 Setting T/H Sensor Parameters

Prerequisites
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H sensor. The screen
shown in
Figure 6-10 T/H Sensor
Step 2 Set Cold aisle sensor 1 to Enable.
Step 3 Set temperature and humidity parameters.
Parameter
Cold aisle sensor
Issue 13 (2023-08-20)
Item
Login button/Logout
button
Teamwork control
button
If T/H sensors outside cabinets have been deployed in the aisle, enable the
sensors. Otherwise, skip
This section describes how to enable Cold aisle sensor 1.
Figure 6-10 is displayed.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Note
logged in to the system, and can tap the icon
to log in.
have logged in to the system as admin or
operator user, and can tap the icon to log out.
indicates that there is no teamwork
control at present.
teamwork control without alarms at present.
indicates that there is teamwork control
with alarms at present.
Step 2.
Description
Enables or disables a sensor.
6 Power-On Commissioning
indicates that you have not
indicates that you
indicates that there is
154