Removing The Pallet - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Figure 4-38 Checking the nitrogen pressure of the outdoor unit
●
●
----End

4.5.2 Removing the Pallet

Context
● Wear protective gloves when unpacking the device.
● Choose railways, sea, or a road with good conditions during transportation. No
excessive tilt or jolt is allowed during transportation.
● Use a pallet truck to transport the cabinet secured to a wooden base to the
installation position. Insert the forks of the pallet truck in the middle position
to ensure balance.
● To prevent shocks or falls, move the cabinet gently.
● After placing the cabinet in the installation position, unpack it and take care to
prevent scratches. Keep the cabinet steady during unpacking.
Procedure
Step 1 Remove the packing materials such as the carton, stretch wrap, foam, condenser
protection cardboard, and plastic bags.
Step 2 Check the accessories against the accessory list.
Issue 13 (2023-08-20)
If the pressure gauge reading is no less than 0.2 MPa, the unit is airtight.
Then open the pressure gauge valve where the hose is connected to discharge
nitrogen. After the discharge is complete, remove the hose and reinstall the
valve bonnet.
If the pressure gauge reading is less than 0.2 MPa, pipes have leakage points,
and you need to contact Huawei technical support.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
81