Independent Networking; Fe Teamwork + Fe Monitoring - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Figure 4-90 Connecting communications cables
----End

4.9.8.3 Independent Networking

4.9.8.3.1 FE Teamwork + FE Monitoring

Step 1 Connect teamwork and monitoring communications cables.
Networking
Protocol
Description
Figure 4-91 Connecting communications cables
If the length of a network cable in the FE teamwork is greater than or equal to
100 m, use the group-based ring networking mode.
Issue 13 (2023-08-20)
NO TE
Select one of the following networking modes according to the actual situation.
FE Teamwork
MAC_CAN
A teamwork network supports
a maximum of 16 units.
NO TE
● If the Modbus-TCP/SNMP protocol is used, customers can purchase the NetEco (a LAN
switch is required) or a third-party NMS as the monitoring system.
● If the number of units in a group is greater than 16, FE teamwork needs to be
implemented by group. For example, if the number of units under teamwork is 18, they
can be divided into two groups, for example, 9+9, 16+2, or 10+8.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
FE Monitoring
Modbus-TCP/SNMP
-
125