Table of Contents
Advertisement
Figure 33: Webpage for changing user passwords.
7.5 Forgot Password
There can be situation where the updated passwords are misplaced or forgotten. In such
a case the device allows to reset the passwords by following the steps mentioned below.
Incase Wi-Fi password is forgotten.
1.
Go near the installed EAGLE device
2.
Use a strong light source (example: torch with a strong non divergent beam)
3.
Point the light source to the light guide opening of the EAGLE
4.
Switch on the light source for 5 to 8 sec and switch off
5.
Within 10s from the last switch off, switch on again for another 5 to 8 seconds
6.
With this sequence the Wi-Fi password resets to its default factory password of
"querty123" for 10 mins.
7.
Connect Wi-Fi using default password within 10 mins
8.
Open the Web-HMI & Navigate to User & Access -> WIFI parameters
9.
Change the WIFI password to a new one and store the same securely
In case a suitable light source is not available, then the Non reclose mode (NRM) handle
can also be used to reset the Wi-Fi password.
1. Change the position of NRM handle from OFF -> ON or from ON-> OFF position
2. Wait for 10s
3. Change the position back to the original position ON-> OFF or from OFF -> ON position
4. The NRM handle should return back to its original positive with in 20s from the first
change of position
5. With this the Wi-Fi password will be reset to its default password
In case user password is forgotten
47
Advertisement
Table of Contents
