Table of Contents
Advertisement
can be accessed through popular browsers such as Google Chrome, Internet Explorer,
Mozilla Firefox or Safari.
Though EAGLE user interface works fine will all of the above-
mentioned browsers, wherever available, Mozilla Firefox is the
recommended option
User connect to the eagle in any handheld device, It can take up to 3
minutes to load webHMI.
Once the EAGLE is powered up, the Wi-Fi chip inside the electronics is activated within
the first 20 seconds. The activation of Wi-Fi is indicated by the flashing of the Lockout
Indicator LED at the bottom of the device. If the recloser has been powered off for an
extended period, the lockout indicator may not blink although the Wi-Fi is turned ON.
In case the Wi-Fi has to be enabled on a device which is already powered up and running,
then the user can toggle the position of the Non-Reclose Mode (NRM) handle (either from
ON->OFF->ON or OFF->ON->OFF) to turn on the Wi-Fi.
Once the Wi-Fi is enabled, the following credentials can be used to connect to the recloser
through the handheld devices.
•
Default Wi-Fi SSID for EAGLE
•
Default Wi-Fi password
Once the Wi-Fi connection is made in Access point mode, the Web HMI can be accessed
using the url: https://rer605.abb.com/
Please refer to Section 7 to a full explanation regarding Access point
mode.
Once the Web-HMI opens, user will be able to see the Dashboard view in "Viewer" mode.
EAGLE provides role-based access to the settings. Hence the users are required to enter
suitable passwords, depending on their role, to access the Web-HMI. EAGLE supports 4
user roles - "Viewer", "Operator", "Engineer" & "Admin" with respectively increasing
authority of access. While the Viewer has limited access to monitor & view status of the
device, the Admin has full access to monitor, program and perform control operations.
The default password format for accessing the Web HMI is "000x", where x increases from
2 to 4 for "Operator" to "Admin" level of access. Viewer does not need a password.
•
Default password for Operator : 0002
•
Default password for Engineer : 0003
•
Default password for Admin
: WIFI_RER605_{SERIALNUMBER}
: qwerty123
: 0004
8
Advertisement
Table of Contents
