Figure 26: Committing Wi-Fi Configuration On Eagle; Figure 27:Windows Wi-Fi Discovery - ABB Eagle Programming Manual

Figure 26: Committing Wi-Fi configuration on Eagle.

3- Now "save" and "send to device", as shown in blue blocks in above picture.
Here the default LRC Device IP address is 192.168.1.254. IP address of
EAGLE1, EAGLE2 should be of same series as above, like in this case ,
series no. should be 192.168.1.1 ,192.168.1.2.....
4- Now go to wifi in your system and select the LRC device SSID name (same as name
configured in above picture) give the password (configured in Eagle device in Wireless
Interface panel in above picture) and connect.
5- After connection go in web browser and type https://192.168.1.254 ( this IP Address
is default, IP address we can see from Wireless interface panel in step-2). LRC device
SSID name (from which the EAGLE is connected) will be appear at the top right corner
of EAGLE's Web-HMI.

Figure 27:Windows Wi-Fi discovery

42