Charging The On-Board Computer Battery; Changing The System Settings - Bosch Intuvia Translation Of Original Operating Instructions

6.5.15.5 Charging the on-board computer
battery
Notice
The on-board computer battery discharges when
it is not in use. This can cause irreparable
damage to the on-board computer battery.
 Recharge the on-board computer battery for at
least 1 hour every 3 months.

If the on-board computer battery is low when the
on-board computer is switched, A TT AC H T O
P E D EL EC appears on the text display for three
seconds. The on-board computer will then switch
back off.
There are two options for charging the battery.
Charging on the pedelec
1 Once a battery has been inserted into the
pedelec, place the on-board computer in the on-
board computer mount. Press the On-Off button
(battery).
2 Using the pedelec
Charging using the USB port
1 Open the protective flap on the USB port.
2 Connect the USB port to a commercially
available USB charger or the USB port on a
computer (5 V charge voltage; max. 500 mA
charging current), using a suitable USB cable.

U S B C O N N EC T E D is displayed on the on-
board computer.
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com

6.5.15.6 Changing the system settings

The System settings can be displayed and
changed no matter whether the on-board
computer is inserted in the mount or not. A few
settings are only visible and changeable if the on-
board computer is inserted. A few menu options
may be missing, depending on the equipment
used.
 Press the Info button (on-board computer)
and the RESET button together.
 S E TT I NG S is displayed on the on-board
computer. The System settings is opened.
 Press the info button (on-board computer)
repeatedly until the system setting which you
wish to change is displayed.
 Press the plus button or the minus button to
change the displayed setting.
 Press and hold the RESET button for
3 seconds to save the changed system
settings and return to the journey information.
Display Change
The current time can be adjusted.
- C LO CK +
If you hold the setting button
down, you can change the time
more quickly.
- W HE EL CI R C U M + The value pre-set by the
manufacturer can be changed by
± 5%. This menu option is only
shown when the display is
positioned in its mount.
You can change the language for
- E N G L I S H +
text messages. You can choose
between English, German,
French, Dutch, Spanish, Danish,
Swedish, Italian and Portuguese.
- U N I T K M / M I + You can choose whether the
speed and distance are displayed
in kilometres or miles.
You can display the time in
- T I M E F O R M A T +
12-hour clock or 24-hour clock
format.
You can turn the gear
- S H I F T R E C O M . O F F +
recommendation indicator on or
off.
Table 50: Changing the system settings
Operation
111