After Each Ride; Cleaning The Lights And Reflectors; Cleaning The Suspension Fork; Caring For The Suspension Fork - Bosch Intuvia Translation Of Original Operating Instructions

For bull cross rider evo 1, cross mover evo 2, cross mover evo 2 26
Hide thumbs Also See for Intuvia:
Table of Contents

Advertisement

7.2

After each ride

Complying with these cleaning instructions is the
only way to reduce wear on components, increase
the operating hours and guarantee safety.
The following items should be ready for use to
clean the pedelec after each ride:
Tool
Cloth
Bucket
Brush
Fork oil
Table 53: Required tools and cleaning agents after each ride
7.2.1

Cleaning the lights and reflectors

1 Clean front light, rear light and reflectors with a
damp cloth.
7.2.2

Cleaning the suspension fork

1 Remove dirt and deposits from the stanchions
and deflector seals with a damp cloth. Check
the stanchions for dents, scratches, staining or
leaking oil.
2 Lubricate the dust seals and stanchions with a
few drops of silicone spray.
3 Care for the suspension fork after cleaning.
7.2.3

Caring for the suspension fork

 Treat dust seals with fork oil.
7.2.4

Cleaning the pedals

 Clean pedals with a brush and soapy water.
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
Cleaning agent
Dish-washing
Water
liquid
7.2.5

Cleaning the brake

 Clean dirt on the rim and brake components
with a slightly dampened cloth.
7.2.6

Cleaning the suspension seat post

 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
7.2.7

Cleaning the rear frame damper

 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
Cleaning and servicing
139

Advertisement

Table of Contents
loading

Table of Contents