Table of Contents
Advertisement
3.5.1.3 Information display
The display shows one of three types of
information. The displayed information can be
changed.
Display
Function
TR IP
Distance travelled since the last RESET
TOT AL
Total distance travelled (cannot be
changed)
RAN GE
Estimated range of the available battery
charge, calculated based on the most
recent manner of riding
Table 19: Information display
3.5.1.4 Level of assistance
The higher the selected level of assistance is, the
more the drive system assists with pedalling.
eMTB mode is available for Performance Line CX
drives. In eMTB mode, the assistance factor and
the torque are dynamically adjusted depending on
the pedalling force applied to the pedals. If the
pedelec has been configured with "eMTB mode",
"eMTB mode" appears briefly when the SPORT
level of assistance is selected.
Level of assistance
Use
OFF
When the drive system is switched
on, the motor assistance is switched
off. The pedelec can be used like a
normal bicycle by simply pedalling.
The push assist system cannot be
activated
ECO
Limited assistance with maximum
efficiency for maximum range
TOU R
Constant assistance, for long-range
tours
SPOR T/ eM TB
SPORT
Powerful assistance for sports rides
on mountainous routes and on urban
roads
e
Optimum assistance on any terrain,
M TB
sporty start-up, improved dynamics
available in
and maximum performance
combination with:
BDU250P CX,
BDU365, BDU450 CX
and BDU480 CX
motors
TU RB O
Maximum assistance up to high
pedalling frequencies, for sports riding
Table 20: Overview of levels of assistance
MY23P01 - 22_1.0_21.10.2022
3.5.1.5 Riding light symbol
The riding light symbol is shown when the
riding light is on.
3.5.1.6 Maintenance indicator
Indicates that maintenance is required.
3.5.1.7 Battery level indicator (on-board
computer)
The battery level indicator displays the pedelec
battery level, not the level for the on-board
computer's internal battery. If the on-board
computer is removed from its mount, the last
battery level displayed is saved. Each bar in the
battery symbol on the screen represents 20%
capacity.
Symbol
Meaning
The battery is fully charged.
The battery needs to be recharged.
The LEDs on the charge level indicator go out.
The capacity for drive assistance has been
used up and assistance is gently switched off.
The remaining capacity is reserved for lighting
and the on-board computer. The screen
flashes. The pedelec battery capacity is
sufficient to provide 2 more hours of lighting.
Other electrical loads, such as automatic gears
and charging of external devices connected to
the USB port, are not taken into account here.
Table 21: Overview of battery level indicator
3.5.2
System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error.
You will find more information and a table
containing all system messages in Section 6.2.
Description
56
Advertisement
Table of Contents
