Pressure Point On A Magura Brake Lever - Bosch Intuvia Translation Of Original Operating Instructions
For bull cross rider evo 1, cross mover evo 2, cross mover evo 2 26
Hide thumbs
Also See for Intuvia:
- Original instructions manual (142 pages) ,
- Original operating instructions (47 pages) ,
- Owner's manual (166 pages)
Table of Contents
Advertisement
6.5.9.9 Pressure point on a MAGURA brake lever
Only applies to pedelecs with this equipment
WARNING
!
Brake failure due to incorrect setting
If the pressure point is set with brakes where the
brake linings and brake disc have reached their
wear limit, the brakes may fail and cause an
accident with injury.
Before you adjust the pressure point, ensure
that the brake linings and brake disc have not
reached their wear limit.
The pressure point setting is adjusted using the
twist knob.
Figure 110: Using the twist knob (1) to adjust the pressure point
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
1
Turn the twist knob towards the plus (+)
symbol.
The brake lever moves closer to the handlebar
grip. Re-adjust the grip distance as necessary.
The lever pressure point activates sooner.
Turn the twist knob towards the minus (–).
The brake lever move further away from the
handlebar grip. Re-adjust the grip distance as
necessary.
The lever pressure point activates later.
Operation
100
Advertisement
Table of Contents
