On-Board Computer; Usb Port; Control Panel - Bosch Intuvia Translation Of Original Operating Instructions

For bull cross rider evo 1, cross mover evo 2, cross mover evo 2 26
Hide thumbs Also See for Intuvia:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
Description

3.3.10 On-board computer

The pedelec has a BOSCH Intuvia on-board
computer.
The on-board computer controls the drive system
and displays the journey data.
The rider can switch off the electric drive system
by removing the on-board computer.
The battery powers the on-board computer if the
on-board computer is inserted in its mount, a
sufficiently charged battery is inserted into the
pedelec and the electric drive system is switched
on. If the rider removes the display from its mount,
the display is powered by a on-board computer
battery. The on-board computer battery cannot be
replaced.
Figure 35: BOSCH Intuvia on-board computer

3.3.10.1 USB port

There is a USB port beneath the rubber cover on
the right-hand edge of the on-board computer.

3.3.11 Control panel

The control panel controls the electric drive
system.
Figure 36: Overview of control panel
40
MY22B01 - 12_1.0_26.08.2021

Advertisement

Table of Contents
loading

Table of Contents