Bosch Intuvia Translation Of Original Operating Instructions page 176

8.5.6 Servicing the steering headset
1 Remove fork.
2 Clean steering headset. If it is very dirty, flush
the bearing with cleaning agents such as WD-
40 or Karamba.
3 Check steering headset for damage.
 If the steering headset is damaged, replace
steering headset as specified in the parts list.
4 Grease steering headset and bearing seat with
highly viscous, water-repellent grease (e.g.
Dura Ace special grease by SHIMANO).
5 Re-fit fork with steering headset as per fork
instructions.
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
8.5.7
Only applies to pedelecs with this equipment
Injury due to explosion
The air chamber is pressurised. If the air system
in a faulty suspension fork is maintained, it can
explode and cause serious injury.
 Wear safety goggles, protective gloves and
 Release the air for the air chambers. Detach
 Never service or dismantle a suspension fork
Hazard for the environment due to toxic
substances
The suspension fork contains toxic and
environmentally harmful oils and lubricants. Such
fluids will contaminate if they enter the sewers or
groundwater.
 Dispose of lubricants and oils left over after
1 Remove fork.
2 Check fork for cracks, warping and damage to
 If there are any cracks, warping or damage to
3 Clean inside and exterior.
4 Grease fork.
5 Install fork.
Servicing the fork
WARNING
!
safety clothing when assembling or carrying
out maintenance on the bicycle.
all air insert fitments.
if it has not completely rebounded.
CAUTION
!
repairs in an environmentally responsible way
in accordance with statutory regulations.
the paintwork.
the paintwork, remove the pedelec from
service. New fork as specified in the parts list.
Maintenance
175