Bosch Intuvia Translation Of Original Operating Instructions page 110

For bull cross rider evo 1, cross mover evo 2, cross mover evo 2 26
Hide thumbs Also See for Intuvia:
Table of Contents

Advertisement

4 Place pedelec 5 m from the wall.
5 Stand the pedelec up straight. Hold the
handlebars straight with both hands. Do not
use the kickstand.
I
II
III
Figure 118: Light positioned too high (1), correctly (2) and too low (3)
7 Check the position of the light beam.
 (I) if the upper edge of the light beam is above the front light height mark (1), the light will dazzle. The
front light must be positioned lower.
 (II) If the mid-point of the light beam is on or slightly below the mark showing half the front light (2), the
light is optimally positioned.
 (III) It the light beam is in front of the wall, move front light up.
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
6 Switch on riding light.
.
Operation
1
2
1
2
1
2
109

Advertisement

Table of Contents
loading

Table of Contents