Nameplate - Bosch Intuvia Translation Of Original Operating Instructions

3.2

Nameplate

The nameplate is situated on the frame. The
precise position of the nameplate is shown in
Figure 1: Example ZEG nameplate
No. Designation
1 CE marking
2 Manufacturer's contact details
3 Type number
4 Maximum continuous power
5 Maximum permitted total weight
6 Year of manufacture
7 Pedelec type
8 Safety markings
9 Disposal instructions
10 Area of use
11 Model year
12 Weight of the ready-to-ride pedelec
13 Shut-off speed
Table 10: Explanation of information on the nameplate
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
ZEG Zweirad-Einkaufs-
Genossenschaft eG
Longericher Str. 2
50739 Köln, Germany
Typ:
3
22-17-1017
EPAC
nach
EN 15194
4
0,25 kW / 25 km/h
5
zGG 150 kg
EPAC 25 kg
6
BJ 2021 / MJ 2022
7
8
Description
The manufacturer uses the CE marking to declare that the pedelec
complies with applicable requirements.
You can contact the manufacturer at the address indicated.
All pedelec models have an eight-digit type number, which is used to
specify the design model year, the type of pedelec and the version.
The maximum continuous power is the greatest possible power for the
electric motor output shaft over 30 minutes.
The maximum permitted total weight is the weight of the fully assembled
pedelec with the rider plus baggage.
The year of manufacture is the year in which the pedelec was
manufactured. The production period is between June 2021 and June 2022.
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Safety markings warn of hazards.
These instructions must be followed when disposing of the pedelec.
The pedelec may only be ridden in authorised locations.
The model year refers to the first production year that the series-
manufactured pedelec was produced in the version concerned. The year of
manufacture is different to the model year in some cases.
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Extra accessories
need to be added to the weight.
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
Figure 2 . The nameplate contains thirteen pieces
of information.
2
1
13
12
11
10
9
Description
More
information
Section 1.1
Section 1.5
Section 3.2
Section 2.6
Section 10
Section 3.6
Section 4.1
23