Advertisement
11
Rotate the Z-drive rotor back and forth to ensure that the Z-drive moves up
and down freely.
Never push the Z-axis slider to move it up or down. Pushing on the Z-axis slider can
CAUTION
kink the drive cable. Instead, rotate the Z-drive rotor on the back of the
autosampler.
Do Not Push the
Z-Axis Slider
Rotate to Move the
Z-Drive
If the rotor does not rotate freely, STOP and determine which part is sticking
(see the Operator's Manual).
9
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
Advertisement
